skip to Main Content
01 (81) 8647-0350 ventas@grupocap.com

Anclas

Más de 15 años de experiencia!

Unisorb Anclas

Anclas
VECTOR® Bolts

Made from high quality forged steel, VECTOR® Bolts have a series of angular facets which resolve vertical stress forces into a cone-shaped pressure pattern. An advantage of this unique design is the increased contact area between the bolt and the grout. The wedge shaped design on the bottom of the bolt transfers the tensile load of the stud into a lateral compressional load in the foundation, assuring maximum pull out strengths.

The increase in load transfer to the foundation results in a reduction of the embedment depth required to obtain full strength of the anchor. This reduction in required embedment depth lowers the installation cost by reducing the core drilling and grouting requirements.

VECTOR® Bolts are available in several metric diameters and lengths in a 90,000 psi minimum tensile strength material.

Heavy Duty JAKEBOLTS®

Constructed entirely of steel, the Heavy Duty JAKEBOLTS® are tough, durable, and MIG welded watertight to prevent contamination of internal components during installation. Each JAKEBOLT® comes supplied with a centralizing bushing which doubles as a seal and protects against contamination during grouting.

JAKEBOLTS® are manufactured with retractable studs to allow a clear floor condition at any time. Anchor studs can be adjusted to project above the floor from 0 to 6″ or 0 to 12″, depending on the bolt specified for the installation. The entire internal anchor assembly can be adjusted laterally as well as vertically to compensate for normal construction variances in both hole location and machine foot thickness.

The Heavy Duty JAKEBOLT® incorporates 90,000 psi tensile strength steel in the bolts. The all steel anchor assembly is designed for service under the most severe conditions.

 
Capsule Anchor System™

UNISORB® Capsule Anchors™ offer tremendous holding power which is stronger than the concrete itself. A graded blend of quartz aggregate transfers the pullout forces into the concrete. Since there are no expansive forces from the anchors, they can be placed near foundation edges, chip troughs, coolant trenches or wireways. High anchor to concrete strengths are developed, allowing smaller anchor holes and studs than what is possible with conventional expanding anchor type systems.

Extensive testing and field trials have proven the UNISORB® Capsule Anchor System™ to be one of the most dependable anchor systems available, far superior to expansion type anchoring systems. The capsules may be used in wet or damp locations, including under water. They can also be used horizontally or overhead without special measures to retain the capsule contents.

In addition to general purpose construction applications and installation of machinery, Capsule Anchors are commonly used in tough-to-hold applications such as installation of dock bumpers and doweling of concrete. UNISORB® Capsule Anchors™ are ideal for anchoring the following equipment:

  • Air conditioners

  • Conveyors

  • Grinders

  • Printing presses

  • Refrigeration equipment

  • Compressors

  • Machine tools

  • Presses

  • Pumps

  • Motors

  • Hand rails

  • Jib cranes

  • Robots

  • Crane rails

Back To Top